Civil War Revolvers and Pistols
Fall Creek Suttlery
Fall Creek Suttlery Tent
Sutler of Civil War Uniforms and Equipment
PO Box 92
Whitestown, In 46075
(765) 482-1861

Enter text to search for:

Civil War Revolvers
and Pistols

Prices are volatile sometimes. Please call for current prices
Our current prices are reflected below.
Prices on this page should be accurate, but subject to change at any time.

For Functioning Revolvers- Scroll Down
For R & D Conversion Cylinders- Click Here

Stars and Bars Line

See some of our Revolver Accessories at the bottom of this page

Warranty Information on our weapons and cylinders is available at the bottom of this page
Ordering from us indicates an understanding of the warranty as stated.


Colt Revolvers

Check out our Oak Revolver Stands at the bottom of this page




Uberti


Colt Walker Revolver



1847 Colt Walker, With a total production of only 1100, the originals of these guns are highly prized by collectors. The massive 4+ pound, 6 Shot, .44 caliber revolver is often referred to as the granddaddy of revolvers. 6 Shot Cylinder is engraved with the scene "Fighting Dragoons". Length of barrel 9", Round Forward of Lug. Steel Backstrap, Brass trigger guard. One Piece Walnut Grip. Overall length 15 3/4".
These are made by Uberti..........................Please Call

Quantity:

Pistol caps, nipple wrenches and cleaning supplies can be found on our "Firearms Accessories Page"

We now have available an R & D Conversion Cylinder for the Uberti Walker. See below or Click Here

 


Pietta
1860 Army Revolver .44 calColt 1860 Army Revolver. The 1860 Army Revolver, because of its lighter weight, improved balance and superior ballistics was adopted by the U.S. Ordnance and became very popular with the mounted troops. This .44 caliber, 8" round barrel percussion revolver was to be the issue side arm for the U.S. Army for many years. Made By Flli Pietta. Blued steel frame. Engraved scene on the cylinder. Walnut grips. Nice reproduction. Functional Firing Weapon..................Please Call

Quantity:   Need a Holster?Holster Icon     


R & D Conversion Cylinders for the 1860 PIETTA Colt Revolvers are not available at this time.

Pietta

1851 Colt NavyColt 1851 Navy Revolver. .36 cal Mfg by Pietta. Blued steel frame. Walnut Grips. Octagonal barrel. Engraved naval scene on the cylinder. 7 1/2" barrel, 13 1/3" overall. Nice reproduction. Functional Firing Weapon...Please Call




Quantity:   Need a Holster?Holster Icon 


R & D Conversion Cylinders are now available for Colt 1851 Navy Revolvers- Please Inquire
R & D Conversion Cylinders are not available for 1851 Colt Navy revolver in .44 caliber- Sorry!


Pietta
Colt Navy Yank, Stainless Steel Icon
Colt 1851 Navy Yank US Marshal. Excellent reproduction by Pietta.
.44 cal only right now. .36 cal may be available by special order.
We called these Stainless Steel for lack of a better term, but the metal is actually a highly polished steel allow that does not rust easily, and accepts the photo engraving very nicely. Fluted Cylinder. Frame is fully engraved. Walnut Grips. This model has been very popular. A nice shooter as well...........................Please Call THIS IS A SPECIAL ORDER ITEM - DELIVERY TYPICALLY TAKES 2-3 MONTHS!

Note- These are made to a higher quality standard than similar models sold by a national discount sporting goods company.

Replacement cylinders in matching metal are available from time to time. Please inquire.
R & D Conversion Cylinders are not available for this revolver in .44 caliber- Sorry!


Quantity:   Caliber   Need a Holster?Holster Icon 

Pistol caps, nipple wrenches and cleaning supplies can be found on our "Firearms Accessories Page"


Pietta
Colt 1851 Reb Navy
. Pietta. .36 or .44 cal. As Above, no engraving.
Steel barrel and cylinder, brass frame as in many Confederate Revolvers of the 1860's.
Trigger guard and grip strap are also in brass. The cylinder is engraved with the Naval Ship scene. Can be loaded and fired with blank rounds or lead ball. (Actual live firing is not recommended with brass frame revolvers).
A very nice reproduction of a CS revolver at an economical price..........................................$ 375.00

Quantity: Caliber   

Need a Holster?Holster Icon     

Check out our Oak Revolver Stands at the bottom of this page



Uberti
Colt 1849 Pocket Revolver
.31 caliber.
As described above.
This is a very popular model now as well as 150 years ago due to its' size and style. Plain cylinder. 4" barrel, 5 shot. Color case hardened frame, blued barrel.
This model is made by Uberti.......................Please Call

R & D Conversion Cylinder for 1849 Colt Revolvers are not available at this time.

Quantity:


Uberti

Wells Fargo .31 calColt 1849 Wells Fargo Model .31 caliber. By Uberti. Nice little pocket model similar to the Baby Dragoon. The Wells Fargo has no loading lever (Projectile is loaded using the cylinder pin) Nice case hardened frame, engraved cylinder as per the Colt tradition.................................................................Please Call

R & D Conversion Cylinder for 1849 Colt Revolvers are not available at this time.

Quantity:



Colt Model 1862 Pocket Navy Revolver,
Made by Uberti .36 cal. Same revolver frame as the 1849 Colt Pocket revolver, with a longer barrel. The design is also similar to the full size model 1851 Colt Navy revolver only smaller frame.
5 1/2" or 6 1/2" barrel length (depending upon availability). This was designed to be carried in a pocket if needed as well as a holster. Blued steel with walnut grips. Octagonal barrel and plain cylinder. Color case hardened frame. A very nice looking revolver and fully functional. ...............................................................Please Call


Quantity:

No R & D Cylinder for this revolver at this time


Colt 1862 Pocket Police,
.36 cal. Handy little revolver with a round barrel similar to the colt 1860. Blued steel with a color case hardened frame. Half fluted cylinder is very attractive. 5 1/2" barrel and 10 1/2" overall. Designed for discriminating use with its' compact design. Could be carried in a pocket or holster.
Fully functional..........................................................................Please Call

Quantity:

No R & D Cylinder for this revolver at this time

Remington Revolvers


Pietta

1858 Remington .44 Cal
Remington 1858 Revolver. 44 cal, Pietta. 6 shot, 8" barrel. The Remingtons feature an over the cylinder frame strap, and an easier system to change the cylinder than the Colt revolvers. The New Model 1858 Remington Army Revolver was one of the major sidearms of the Civil War and presented the greatest competition for the Colt Model 1860 Army. This on is our best seller. Easy to load, clean, and
accepts the R & D Conversion Cylinders easily. Functional Firing Weapon ..Please Call

Quantity:   Need a Holster?Holster Icon     

Pistol caps, nipple wrenches and cleaning supplies can be found on our "Firearms Accessories Page"


Spare Cylinder for PIETTA Remingtons. Blued finish matches the revolver above..44 caliber........$122.95

Quantity:    


R & D Conversion Cylinder Blue

R & D Conversion Cylinders are available in a matching finish for all Remington 1858 Revolvers...
(See the R & D Listing Below)



Uberti

Remington 1858 Revolver, Stainless Steel. Made by Uberti. Full size reproduction in .44 cal. Standard Remington sights,
Uberti Quality in Stainless Steel requiring minimum maintenance. (Always clean your weapon after firing)
The Remingtons feature an over the cylinder frame strap, and an easier system to change the cylinder than the Colt revolvers. The New Model 1858 Remington Army Revolver was one of the major sidearms of the Civil War and presented the greatest competition for the Colt Model 1860 Army.
Functional Firing Weapon .........Please Call

Quantity:   Need a Holster? Holster Icon     

Pistol caps, nipple wrenches and cleaning supplies can be found on our "Firearms Accessories Page"

R & D Drop -In Conversion Cylinder, for stainless steel Remington revolvers. R & D Conversion Cylinders- Stainless Steel
This is the only 6-shot conversion cylinder available on the market (patented). Features a Marked Empty Chamber for safety. Cylinders are made from 4150 arsenal grade Stainless Steel. Already approved by SASS. Specify the make of your weapon. No FFL is required to ship this product. This selection is for the Uberti Remington shown above................................$300.00

Quantity:


1863 Remington Pocket Revolver
Pietta

1863 Remington Pocket Pistol Small size .31 cal. 5 shot, 3 1/2" barrel. Brass frame pocket pistol. Blued Steel Barrel and Cylinder. Built in loading lever. Easy to load and clean. Very popular with the ladies, and as discreet protection for men. Made By Pietta....................Call First

We have an open top belt holster made specifically for this revolver made from black bridle leather. These holsters are usually worn with the butt facing backward....$21.95

Remington Pocket Pistol Quantity:    


Pietta
1863 Remington Nickle

1863 Remington Pocket Pistol- Nickel
As above, small size .31 cal. 5 shot, 3 1/2" barrel. Brass frame pocket pistol. Nickle plated as per original examples. Built in loading lever. Easy to load and clean.
Made by Pietta............................Call First




We have an open top belt holster made specifically for this revolver made from black bridle leather. (See Above).............$21.95

Remington Pocket Pistol Quantity:    

Pistol caps, nipple wrenches and cleaning supplies can be found on our "Firearms Accessories Page"


Pietta


1863 Remington Pocket Pistol- Steel Frame, Blued.
As above, small size .31 cal. 5 shot, 3 1/2" barrel. All Steel frame pocket pistol. Blued as per original examples. Built in loading lever. Easy to load and clean. Popular smaller size for easy concealment. Made by Pietta............................ Call First


We have an open top belt holster made specifically for this revolver made from black bridle leather. (See Above).............$21.95

Remington Pocket Pistol Quantity:    

Pistol caps, nipple wrenches and cleaning supplies can be found on our "Firearms Accessories Page"


Uberti


Remington Revolving Carbine
, Manufactured by Uberti. This is one of the first muzzle loading revolving carbines. It is different from the revolvers for its easy handling and reliability. About 3,000 models were produced between 1866-1879. .44 Caliber. Barrel is 18" in Length. 7 groove rifling, Left Twist. 6 Shot Cylinder, Octagonal Tapered barrel, Steel Frame, Walnut stock with adjustable sight. Be the first on your block.
........................................................................................................................................ ...........................................Please Call
Please Note- these come from Uberti with a hard polyurethane finish on the stock (as shown). The stock is real walnut, not plastic
.

Quantity:



R & D Conversion Cylinder BlueThe R & D Conversion Cylinder for Uberti Remingtons will work on this "Carbine" making it the coolest little Remington available. Add one for this purchase.....$270.00

Conversion Cylinder Quantity:




Pietta

Lemat Picture LeMat Revolver Designed by Col LeMat. Made By Pietta. These saw use by CS Cavalry forces.
Nine .44 cal rounds and one .20 Gauge Shotgun all in a hand held revolver. These are available in a limited quantity. Checkered walnut grips, Nice blued finish. These have been selling for over $1200.00.........Please Call

Please contact us to check on availability.


Army and Artillery models may be available from time to time. Please inquire.

Quantity:




REVOLVER NOTE...
The above revolvers and derringers are all exact copies of the originals. Classified as "Cap and Ball", capable of being loaded and fired with black powder and a lead projectile. These are not classified as a firearm by the ATF, and can be purchased from us by anyone of legal age.
The Non- Firing replicas as listed on the link below, are just that - Non-Firing replicas of revolvers used during the Civil War period. They have functioning actions and hammer mechanisms, but are not capable of being loaded or fired. They are for display purposes only.

Non Firing Pistol Page


To see a Great testimonial for the R & D Conversion Cylinders- Click Here

New StarR & D
CONVERSION CYLINDERS!!-
Dancing Ball ManR & D Conversion Cylinder Blue
R & D Drop -In Conversion Cylinder. The original conversions surfaced after the conflict between the States ended in 1865. The new innovation for that time was 'fixed cartridges'. The Federal Government had stockpiles of old style weapons and wanted to change their inventory to this new innovation. The government converted Colt, Remington and Civil War Rifles to cartridge to update their arsenals. The capability available today, modern steel and technology, have contributed to build conversions again. We offer a superior product that looks and functions in the same manner as the manufacturer's original arms were built. Our Five shot patented cylinder chambers .45 Long Colt "Cowboy" ammunition which the original manufacturers were unable to do with their conversions. Only top grade steel is used in the productions of these cylinders; 4150 arsenal grade steel for the cylinders and 4140 steel for the top plate. The certified steel in these cylinders offers superior quality and strength to insure safety and durability with their use. THESE CYLINDERS ARE DESIGNED FOR STEEL FRAME REVOLVERS ONLY. Switch from percussion to .45 Long Colt (black powder or smokeless loaded to cowboy specifications) just by changing cylinders. Please note that these are five shot cylinders.
Available for 1858 Remington Revolvers made by Pietta, Uberti, and Ruger Old Army. Steel Frame Revolvers Only. ...............................................................................$270.00
These are SASS Approved

Remington .44 cal - .45 lc

Quantity:

Warranty Information on our weapons and cylinders is available at the bottom of this page
Ordering from us indicates an understanding of the warranty as stated.


Note!-
The R & D Conversion Cylinders offered by us
are usually hand tooled to order for us.
We therefore may not have the specific R & D Conversion Cylinder
that you desire on the shelf for immediate shipment. It may take some time for delivery depending on the workload at R & D.
Please call for availability.



R & D Drop -In Conversion Cylinder, for stainless steel Remington revolvers. R & D Conversion Cylinders- Stainless Steel
We are offering the five shot version of this cylinder at this time. Features a Marked Empty Chamber for safety. Cylinders are made from 4150 arsenal grade Stainless Steel. Already approved by SASS. Specify the make of your weapon. No FFL is required to ship this product.
...............................$300.00

Quantity:



R & D Drop -In Conversion Cylinder,
for Remington Old Silver, by Pietta.
"Jewel Cut" engraving on a blued cylinder to harmonize with the engraving on the Old Silver. Detail of the engraving is shown here.
...................................DISCONTINUED

Quantity:





R & D Drop -In Conversion Cylinder, for Colt 1851 Navy.
Now available for the Colt 1851 Navy .36 Caliber Only! Steel Frame Revolvers Only! This cylinder is a 6- shot conversion cylinder with a firing pin for each chamber. You can switch from cap and ball to center fire ammunition by merely changing the cylinders.
Black powder, or the equivalent Smokeless load, as provided by commercial ammunition companies, are sold under the industry name of "Cowboy Ammunition" in .38 Long Colt. This is the only type of ammunition that should be used with these conversion cylinders.

This R & D Conversion Cylinder is available for Pietta and Uberti 1851 Navy reproductions only
Not Available for the 1851 Colt US Marshall in .44 caliber

SASS Approved
For Colt Revolvers, You must not use the conversion cylinder if the cylinder pin is not tight in the back of the frame. If there is any question- you should seek assistance from a professional gunsmith.
.......................................... ....................................
...............$270.00

Quantity:

Warranty Information on our weapons and cylinders is available at the bottom of this page
Ordering from us indicates an understanding of the warranty as stated.


R & D Drop -In Conversion Cylinder, for Colt 1860 Army. Uberti Only
Now available for the Colt 1860 Army. Steel Frame Revolvers Only! This New cylinder is a 5- shot conversion cylinder with a firing pin for each chamber. This cylinder also features a Stop Notch in between each chamber that can be used for safety so the hammer is not on a loaded chamber. There are also 5 small cutouts to allow the brass cartridge to be shown in each loaded chamber.
For use with black powder, or the equivalent load, as provided by commercial ammunition companies. Ammo is sold under the industry name of "Cowboy Ammunition" in .45 Long Colt. This is the only type of ammunition that should be used with these conversion cylinders.
This R & D Conversion Cylinder is available for Uberti 1860 Army reproductions ONLY.


These are SASS Approved
For Colt Revolvers, You must not use the conversion cylinder if the cylinder pin is not tight in the back of the frame. If there is any question- you should seek assistance from a professional gunsmith .............................................................................................................................$270.00 

Quantity:



R & D Drop -In Conversion Cylinder, for
1849 Colt Pocket Revolver, Wells Fargo, or Baby Dragoon Models.


The conversion cylinder for the 1849 Colt Pocket Revolver is no longer available in .32 caliber due to potential safety issues with the current reproductions.

An alternate .22 Conversion for these revolvers is currently in development and may be available in late 2020. This would include an easy to install and uninstall barrell sleeve to accomodate .22 cal.
If you are interested in beiung notified once this conversion is perfected, please let us know.

For Colt Revolvers, You must not use the conversion cylinder if the cylinder pin is not tight in the back of the frame. If there is any question- you should seek assistance from a professional gunsmith ...................Please Inquire

Quantity:



R & D Drop -In Conversion Cylinder,
for Colt 1847 Walker.

Now available for the Colt 1847 Walker.

This New cylinder is a 6- shot conversion cylinder with a firing pin for each chamber. This cylinder also features a Stop Notch in between each chamber that can be used for safety so the hammer is not on a loaded chamber. There are also 6 small cutouts to allow the brass cartridge to be shown in each loaded chamber.
For use with black powder, or the equivalent load, as provided by commercial ammunition companies. Ammo is sold under the industry name of "Cowboy Ammunition" in .45 Long Colt. This is the only type of ammunition that should be used with these conversion cylinders.
This R & D Conversion Cylinder is available for the Uberti 1847 Walker reproduction Only.
.............................$280.00

Quantity:

To see a Great testimonial for the R & D Conversion Cylinders- Click Here


 

 

Accessories


Ammunition


We have soft lead round ball ammunition for all of our Black Powder revolvers. These are made by Hornaday and come in boxes of 100.
Recommended ball size per caliber is- .44 cal = .451 ball, .36 cal = .375 round ball.
Per box of 100...........................$19.95

Quantity:   Caliber / Size     

 


 

Oak Revolver StandOak Revolver Stand Again


Revolver Stand, Made from Oak. Great for display, loading or cleaning your favorite Civil War or Cowboy revolver. Holds your revolver horizontal for display, or vertically for display, cleaning or loading. Fits any size weapon. Very nice addition to your collection............ $19.95

Quantity:






Pistol Cleaning Kit
Pistol Cleaning Kit, Two section rod with cotton swab, bronze brush, and nylon brush. Comes in a handy plastic carrying case. Specify .44 or .36 cal...............................$21.95

Quantity: Caliber:



BallistolI icon


Ballistol Lubricant and Protectant, This is the best stuff on earth. Cleans, lubricates and protects wood, leather, and metal. Click on the link to see what it can do. Eats rust film right off of your musket, and shines up your leather. You will not be disappointed with this product. 16oz Can of liquid. Includes a spray attachment for the top of the can....$19.95

Quantity:






Ballistol
is also now available in a 6oz aerosol spray can.
I find this nicer and easier to use than the oil above. 6oz can.....................$11.95



Quantity:


More Revolver Accessories and Shooting Supplies are available on our Firearms Accessories Page- Click Here

View the Warranty Information for our Weapons and Conversion Cylinders
Click Here

Click here to view your shopping cart


Click below to browse our Website:

CW Carbines- Sharps,etc

  Buttons
  Tents
  Wanted
  

All info and pictures Copyright 2024 Fall Creek Corporation
Nothing can be copied without permission.
765-482-1861